Especially in new buildings, there may be problems with the reception of mobile phones, as energy-efficient building materials in the exterior walls of buildings and modern windows weaken the signal of mobile phones. The solution to this problem is signal windows. The glass parts of the signal windows pass through the radio signals of mobile phones and wireless networks, ensuring good connections indoors.
The signal glasses can be installed on both fixed and openable windows. The signal glass does not impair the U-value of the windows and does not prevent the use of other accessories such as blinds and special glazing. The signal window is virtually maintenance free and does not require a separate power to operate. In appearance and installation, the signal window is no different from ordinary windows.
Signal window from the inside
Signal window from the outside
To ensure the best possible reception, it is advisable to place the signal windows especially on the wall on the base station side of the telecom operators. When placing signal windows, you should also take into account the building environment and the reflection of signals from the surfaces. We therefore recommend placing one signal window in each room of the apartment.
- Good signal transmission can be achieved without degrading the U-value of the window
- The advantage of the FGL RS solution is that the entire area of the glass transmits signals, thus better avoidingdead spaces
- The solution also works in a weak signal field (vs. passive antennas)
- FGL RS glass transmits 4355 times better radio signals than conventional glass! (5g in the 3500MHz range)
|Attenuation point at frequencies [dB]|
|0 MHz||900 MHz||2100 MHz||2600 MHz||3500 MHz|
|Average penetration of typical windows with attenuations||21||34||39||41|